SEMI-AUTOMATIC VERSION COMPLETE WITH FRAME ON WHEELS COMPOSED OF:
The UNIVER Della Toffola filter presses are cardboard filters that allow both the use of filter cardboards and chamber filtration plates made of plastic material. Based on a proven technology in which Della Toffola has decades of experience, they have always constituted a simple and effective solution for all processes that involve the separation of the liquid part from the suspended solids.
UNIVER filter presses allow the convenient replacement of plate filter packs with filtration sheets, adapting to various sectors always with excellent results. They are designed and built mainly for the filtration of lees and, with the addition of a centrifugal pump, of wines, musts and wine processing by-products. However, with specific accessories they can also filter other products, such as oils, juices, drinks and chemical and pharmaceutical products.
Built using the best materials and components, UNIVER filter presses are extremely reliable and guarantee long life.
All parts in contact with the product are made of AISI 304 stainless steel.
Finally, all filters are equipped with a feeding pump and a manual or automated hydraulic closing system.
DESCRIPTION:
Stainless steel support frames
Axial load with pneumatic guillotine valve GAROLLA 150
TECHNICAL DATA:
Dimensions: 6976×2707 mm (h = 2406 mm without elevations)
Dimensions of pneumatically opening loading door: m 750×550
Total installed power: 13 kW
Whole grape loading capacity: kg 11,200
Crushed grape loading capacity: kg 32,000/43,000
Fermented grape loading capacity: kg 40,000/55,000
**RECONDITIONED**
DESCRIPTIONS:
Dimensions: 7017×2666 mm (h = 2400 mm without increases)
Pneumatic opening loading door dimensions: 615×575 mm
Total installed power: 13 kW
Whole grape loading capacity: 11,200 kg
Pressed grape loading capacity: 32,000/48,000 kg
Fermented grape loading capacity: 50,000/65,000 kg
DESCRIPTION:
Closed tank with internal channels in iron
Four wheels, two of which with brake
Must collection tray
Evacuation system for exhausted marc by means of internal guides
Axial loading device positioned on the axis of the head, loading by means of a 100 m diameter stainless steel pneumatic valve
Without compressor on board
IRON TANK
**SECOND HAND**
DESCRIPTION:
Made entirely of painted steel
Open tank
Four wheels, two of which with brake
Must collection tray
Evacuation system for exhausted marc by means of internal guides
Axial loading device positioned on the axis of the head, loading by means of a 100 m diameter stainless steel manual valve
Incorporated compressor
ELECTROMECHANICAL CONTROL PANEL reconditioned
Compressor and blower reconditioned
YEAR 1991
DESCRIPTION:
Hourly production tons 60.
Entirely made of stainless steel AISI 304.
Destemmer shaft with pegs made of stainless steel fitted at the end of adjustable rubber spatulas.
Holed cylinder made of stainless steel (diam. 900 mm x 1980 mm length-holes diam. 28/22).
Beater shaft with variable speed “SYSTEM INVERTER”.
Equipped with junction box , connections to the motors and safety switches.
Internal cleaning system.
Easy interchangeability of cylinder and beater shaft.
CRUSHER WITH FOUR RUBBER ROLLER:
Placed below the cage, supported by two rails.
Scrolling lets you perform different operations: 1) destemming and pressing simultaneously; 2) only destemming; 3) only pressing.
Geared motor power: 4 kW
DRAINING HOPPER:
Large hopper with feeding screw driven by an electric motor 2,2 KW.
Large draining surface of sheet with oblong holes.
Inspection door to allow cleaning in the juice collection tray.
TECHNICAL CHARACTERISTICS:
Beater shaft motor power KW7,5.
Holed cage motor power KW 1,5.
YEAR 2015
DESCRIPTION
Entirely made in stainless steel AISI 304
The horizontal transferring system and the adjustable opening under the hopper allow different processes:
The geared motovariator of the beater shaft allows a soft process.
The hopper with screw allows to work with mechanically harvested grapes.
Easy inspection and cleaning.
Beater shaft with stainless steel pegs and holed cage
With two rubber rollers under the cage that allows different processes: crush and no-crush
No control panel
Technical characteristics:
– Production (ton/h) 20/25
– Holes diameter mm. 25
– Motovariator power Kw 2,2
– Gear motor power Kw 1,5
– Dimensions: 2.780 x 840 x 2.300
– Weight Kg. 700
La diraspatura ha lo scopo di separare i raspi dagli acini per ottenere un vino più armonico e meno tannico.
A tal fine è importante rispettare l’integrità dell’acino nel separarlo dal suo pedicello.
La Diraspatrice VEGA 10R con il Selezionatore a rulli ROLL SELECTO combina l’efficiente azione di diraspatura delle VEGA alla accurata selezione degli acini del ROLL SELECTO. Diraspatura e selezione con un’unica macchina: riduzione degli ingombri e scarico unico dei raspi
Portata: 8 – 12 ton/h
Completa di gambe telescopiche con ruote
Dimensioni: 2600 x 1350 x 2200 h mm
Peso 700 kg
SENZA PIGIATRICE
**SECOND HAND**
Electronic temperature controller for automatic management of coolant circulation.
On stainless steel cabinet with counter door.
Equipped with PLC
Probes EXLUDED
Year: 2002